Fuill falt,half flat,large full flat,quarter flat,square flat
Packaging & Delivery
Curved Ceramic IR Heater Packing:
Foam/plastic bag and carton/wodden box
Within 7 Working Days
Curved Ceramic IR Heater
4.Wide Application in Industry,Electrics
Prodcuct Name: Curved Ceramic IR Heater
Curved Ceramic IR Heater are 96% infrared energy efficient. Uses for electric infrared heat can be found in many industries and applications and can be grouped into four major categories.
Within each of these major categories are literally hundreds of specific applications, and the list keeps growing as technology develops.
Our ceramic infrared heaters (emitters) are manufactured with three basic emitter faces: Concave, Flat and Convex. These emitter face styles will result in the specific radiant emission pattern as shown in our Ceramic Infrared Emitters Technical Manual. The concave surface will emit a “concentrated” radiant pattern which is highly effective when zone heating is desired as well as radiant heating in general. Flat surface emitters will produce a “uniform” pattern for even heating at a close proximity between the emitter and the target being heated. Finally, the convex shaped emitter gives off a “wide area” pattern which is desirable in comfort heating or other applications that require a dispersed radiant emission pattern.
These heaters are durable, splash-proof and have a non-corrosive finish. Maximum temperature output of up to 1292*F (700*C). Estimated life of 10,000 hours with one (1) year warranty.
Standard Features of Curved Ceramic IR Heater
Iron-chrome aluminium resistance wire
Heater Voltage: 230~240 V standard except for the
250 W ESER bulb - 240 V as standard (other voltages available on request)
Useful wavelength range: 2-10 microns
Average Operating Life-Up to 20,000 hrs depending on conditions
Recommended radiation distance from heater is 100 mm to 200 mm
E27 tap on bulb cap
Application of Curved Ceramic IR Heater
it's widely used, food, medical, electronics, plastics, wire and cable, automotive and packaging industries, for baking or a temperature, and other uses stereotypes.
Technic Index Data Sheet of Curved Ceramic IR Heater
1. Rupture strength for base body:
2.Resistance in common temperature:
1012 ohm 0cm
3.Property:good chemical stability;strong causticity-resistance;perfect oxidation-resistance
4.Heat losing in the non-radiation surface is small
5.The base body is heated to 800 C and put in cold water repeatly for ten times and no cracking.
6.The radiated element is heated after electrifying to rating power and immerged into cold water after interruption of power supply for forty times without damage.
7.The max radiance of element>0.9
8.The effect of energy saving is obvious,increasing 10-25% compared with silicon carbide element
9.The life span can prolong more than a few times compared with silicon carbide element.
About Ceramic infrared Heater
What is Ceramic infrared heater?
Ceramic infrared heaters are made out of ceramics. These emitters have a Nichrome (NiCr) wire directly
casted into ceramic and they produce temperatures from 300 deg F to 750 deg F. The wavelength produced
with at these temperatures is between 3 6 microns. They feature a glazed surfaced to avoid for protection
from oxidation and corrosion. Typically ceramic infrared heaters need 10 15 minutes to reach full operating
temperature. A thermocouple can be casted directly into the ceramic. Ceramic infrared heaters come in
different colors which may indicate the temperature range. Some of ceramic infrared heaters also change
color when hot in order to easily recognize failed elements in a heater bank. They come in different shapes.
A flat surface spreads the infrared energy over a wider area, while a concave surface focuses the energy
more to a desired spot.Ceramic infrared heaters are used for comfort heating, saunas and for industrial
heating application requiring lower temperatures.
We have standrad size 245*60mm,240*60mm,122*122mm,122*60mm,60*60mm ,then
we can do as customer demand size
What are the common sizes of Ceramic infrared heater?
What are the Main Property of Ceramic infrared heater?
1 .Embedding type ceramic far infrared radiated elements apply glaze with high radiance,ceramic with
good heat and shock property are sintered once by nichrome wire.
2. Heat losing in the non-radiation surface is small.
3. It has energy efficiency and environmental protection benefits
4.The radiated element is heated after electrifying to rating power and immerged into cold water
after interruption of power supply for forty times without damage.
4.Heating in vertical or half round array (for example: Angle iron,Aluminum windows paint stove) .
Design and produce according to the requirements of customers on operating voltage, power, size, length etc.
WHO WE ARE
Our policy is to achieve customers' satisfaction both by providing them with high level product quality and services that meet or exceed their expectation. Our aim is to ensure that our clients continue to put their faith in us for many years to come.